We have engineered a durable and long-lasting protective coating that has been tested and used in all weather conditions for over 10 years! This unique, high technology product protects against boatyard contaminants such as overspray, bottom paint sanding residue, airborne metal particles that cause rust spots, ultraviolet damage, and airport jet engine residue fallout. It literally wraps your boat in protection.
Liquid Shield Wrap can also be applied on the aft of the hull and transom before a long voyage to protect your boat from both engine exhaust and generator black residue while under power. You can also roll on Liquid Shield Wrap to provide great protection for your boat during inland transport and shipping abroad. It can also be applied to the boat to protect it from UV damage (oxidation).
Recommended industries for application: Aircraft, Marine, Automotive, and even Amusement Park Rides
How to apply:
Roll on Liquid Shield using a 6 or 9-inch foam roller. You will see a very thick coating. Approximate drying time = 1 hour (depending on weather and humidity)
Removal:
For removal, use a boat soap and a soft brush or sponge and go over it with a white terrycloth towel or microfiber cloth.
Area of application:
If you use the 6-inch foam roller, you should cover approximately 600 / 800 square feet per gallon. At times, you may need a thicker coating so it’s best to use a 1/4 or 3/8 nap roller - The bigger the nap, the thicker the application and more material is used. (A thicker application is recommended for boatyards, UV protection and shipping).
Application:
Can be applied directly in the sun on white and light colors up to 110 degrees. If your aircraft, boat or auto has dark elements, it is recommended that you apply Liquid Shield Wrap under cover or on the shaded portion.
- Easy to apply and remove.
- Resists and repels paint overspray, minerals, salt, oil-based residues, pollution, bird droppings.
- Great UV protection once applied.
- The applied coating will not be affected by weather such as bright sunshine, morning dew or hard rain.
- Reduce paint and gel-coat damage during shipping and boatyard visits.
- Liquid Shield Wrap is a covalent amino functioning polymer coating that lasts 3-4 months!
- Can be used on all surfaces: painted, gel-coat, glass, stainless steel and acrylic glass.
- If your boat is moored at a marina and you apply Liquid Shield Wrap, you will not need to wash or wax your boat for 3-4 months and the surface will not oxidize!